DIY Full Length Mirror & Floor Vase

I decided that after finishing the bedroom, it was still missing something. Specifically in the corner by the window. It was bare. But I didn't want anything too big because we already have a lot of big furniture in there. So, I decided to re-purpose a 5.00 Walmart mirror. You can find the original tutorial here. I started by pulling the cheap plastic molding off from the mirror. Please be very careful with this step. I broke my first one, and was extremely ill. Plus it sliced my finger. So, anyways, after that, we (I had Jason help me since I'm new to the whole electric saw thing) cut some 1x3 boards to frame it out, measuring the pieces long enough to fit around the mirror but leaving enough of a lip on the wood so that we could glue the mirror in place later. Then we stapled it in the corners on the back side to help the wood glue dry and help hold it extra super good. 

 

 

Jason took over stapling for a minute so I could get some pictures:

Then we hammered the staples in really good and flat, and let it all dry overnight!

I was so excited to get it done that I forgot to take any pictures of the staining process or gluing the mirror in, but it's pretty self explanatory.  We used Rust-oleum Wood Stain in Dark Walnut.  We let it dry for about 5 minutes and then wiped it down.



After it was done, we put it in said corner.  It still wasn't doing it for me.  So, I made another rope wrapped vase.  This one was a floor vase, and I used the chunkier Sisal Rope.  It used every bit of that role of rope except for one inch of it.  It worked out perfectly.  The vase was an 18 inch glass vase from Michael's in case you are wanting to duplicate!

Once it was wrapped up, I added it next to the mirror with the intent of adding some kind of vase filler.  STILL wasn't happy.  So, the last thing that I decided on was an old crate to set it all on top of.  Since I haven't been able to find one at the very limited amount of thrift stores around here, we made one with extra scrap wood.  We built the frame out of 2x2's in the dimensions we chose, which were 22 inches wide, 11 inches deep, and 13 inches high.  Then we just used wood glue and finishing nails to nail 1x3's all around the frame and across the bottom (which is kind of like the top since I turned it over to sit everything on top of).  We rubbed some of the same stain from above on random places, and once that dried, gave it a good coat of spray paint in Valspar's Churchill Vanilla.  Once it was all dry, I sanded the heck out of it and made it look as beat up as I could before the heat forced me inside again.  But I was so happy with the final product. 

So without further ado...the not so empty corner:

Our "rustic" crate that I am so in love with:

Added a few accessories.  Awesomely large grapevine ball was from Michael's, little box was in a gift set from Walmart.



 

 

The vase branches were 2.00 from a Salvation Army store, they were the same color as the mirror and blended too much, so I painted those too.  Same color as the crate.  The finished look was exactly what I was going for. I love when that happens! 

This Week's Highlights

Jason is in between having classes on deck, so he has normal working hours again, and has weekends off!  Well, 'til the end of the month anyways.

We finished building the lean-to off the back of our shed last night!  Thank heavens.  It looks great, J did most of the work, I was just the assistant.  We just have to make some shelves and hang them, buy a few hooks for tools, and put some gravel inside for the mower, oh, and decorate it.  I'll post pictures soon!

My fall stuff is coming out.  Today.  I hope.  J has to dig it out from storage for me.  Because I'm afraid of spiders.  And lizards.

Our friends, Brad & Ashley came to visit last weekend.  It was a lot of fun.  We went and saw the Battleship in Wilmington.  First time for us, and we've lived here for almost 7 years.  It was toasty though, I think we will probably go see it again this fall or winter when it's cooler.

Kojak got a haircut!  Yay! 

J and Brad got the engine back in the Eclipse.  Another yay!  Can't wait 'til that car is up and running again.

I fashioned a blanket basket for the living room to collect all the stray blankets in one area.  The basket doubles as a photography prop sometimes, but it is also the perfect blanket holder.  I used some scrap wood to make a rustic sign with left over paint.  I roughed it up and made it look shabby.  I used letters from my Cricut to stick on after the first coat of black, then sprayed the off white over top.  Roughed it up with sandpaper and a paint scraper, and peeled off the letters.  Then I just attached it with some twine.

We occasionally check out the Big Lots here to see if there are any deals.  It's across town, and definitely not the nicest one I've even been to, but it's worth a quick peak once in a while.  They had citronella lanterns on clearance for the end of the season.  Real metal ones with glass globes.  And for only 4.00 a piece!  Score.  I took the citronella candles out, and will be replacing them with fall scented candles.  But first, we will take them apart and paint them black.  I have a really cute idea for them.  Can't wait to show you!

Our bi-weekly date night is coming up tomorrow (it will be more like a day this time).  I really look forward to these.  We've enjoyed finding creative ways to "date" without spending much or any money.  For just the cost of gas, and probably a cheap meal, we are going thrifting and window shopping in Atlantic Beach.  I'm lucky to have a fella who will do those things with me.  And actually enjoys it.  He's all about some DIY stuff.

J and I were able to take a walk the other night.  It was the coolest evening we've had in a long time, so we took advantage.  It was nice to breathe in some fresh (not so horribly humid) air, and enjoy the breeze coming from the rain showers that we had on and off all week.  We did some scouting for some nature themed decor.  Can we say free!  We found some small dead trees that had the perfect type of branches for floor vase fillers.  They will get a coat of paint soon.  And, I've started collecting some pine cones for the fall and Christmas decorations.  Now if we could just have that cool weather back.

OH!  I just found out this week that HOBBY LOBBY is coming to Wilmington.  Yeah, it's about 45 minutes away, but up until now, I didn't have a Hobby Lobby within driving distance.  The closest one is about 2 1/2 hours away.  You can't even imagine how happy this makes me!

Enjoy your weekend, I plan to:)

Twine & Rope Wrapped Vases

Most of these vases I found around the house or in cabinets because I was bored with them.  Plain clear glass vases.  I ended up buying one, the one in the first picture from Walmart for about 5.00.  I purchased some twine and sisal rope from Lowe's, it's all one the rope/rope cutting aisle.  First, clean your vases and make sure you have plenty of glue gun sticks.  For my first run, I probably overused the glue.  I pretty much covered the vase as I went.  But the twine tended to slip a little easier than the rope.  So over-gluing is probably not a bad idea.  I started at the bottom of this one and all you do is just wind it, wind it, wind it.  Around and around, until you are at the top!

And then, you'll have this!  I love this look!  It's very simple, natural and earthy.  I haven't found the right flowers for this yet.  I think it will get a fall arrangement soon!

With the second one, I wanted a chunkier look.  So, I used the Sisal Rope, and a different shaped vase.  This one was on the top shelf of my kitchen cabinets, holding spare mini-grapevine balls.  Down it came, and the wrapping commenced.  I didn't have to use as much glue because the rope held it's shape better and didn't slip as easily.  I put a line of glue about every 1/4 to 1/2 way around each loop.

I started at the top of this one since the opening was pretty large.  I wanted it to have the look of it all being rope, so I wrapped the inside opening first, working my way up the inside, and then down the vase.  It totally achieved the look I was going for.  Oh how I love when that happens!

The finished look.  I think it turned out to be my favorite!  Keep reading, you'll see what I did with it at the end of this post!

Then, there was two taller, round vases that we used at our wedding for candles.  They got a good wrapping too.  Since I was running low on rope and twine by this point, I added some canvas with some stenciled numbers on them about 2/3 of the way up.  I was excited that this turned out how I pictured it in my head.  This doesn't always happen.  Believe me.

Just glue a strip of appropriately sized canvas around the vase, and cover with a row of two of the rope or twine to hide the seams. 

The chunkier rope needed a little something.  I didn't like the contrast of the thin material and the thick rope.  So this is what I came up with.  3 signifies the month we got married in, and there are three of us in our little family...including the dog, he would be seriously offended if he was left out ;o)

The second one wrapped with twine and canvas.  7 is my favoritest number, so of course it had to be included.

I did these over the course of two days.  It does take some time, but it really is an easy project.  Cheap too!  Especially if you already have a lot of extra glass vases hanging around.  Hey, glass anything really.  Wrap some mason jars, or glass bottles, it would all work!

And, here's how I'm using them right now.

This little one for pens on our coffee table was a little addition a few days later when I was frustrated with the abundance of pens laying around with no where to go.  I dug out a little jar that held pumpkin butter from Cracker Barrel last fall.  It got the same treatment and the number 5.  That is for the day we were married on.

Oh how I so love the way these fall flowers just fit with this vase.  Yeah, this is definitely my favorite so far!  It's the first of my fall decorations this year.  Many to follow soon!  I'm getting impatient.

Plus, I got these flowers really cheap at Michael's.  All of their fall bouquets were 40% off, and I only needed two.  I'm loving that the stores are starting to bring out their Autumn decor. 

Happy wrapping!

DIY Mousepad

After months of using my mouse on the bare countertop and it collecting dust and whatever little particles it could pick up (therefore junking up the sensor eye), I decided it was time to make a mousepad.

You need:

A 9x8 piece of sturdy cardboard

A piece of thick fabric (I used canvas from a dropcloth) big enough to wrap around your cardboard

Glue gun

Stencil

Paint

Start by wrapping the fabric around the cardboard, like you're wrapping a present.  Gluing at the seams, and where the fabric will hit on the cardboard and need securing.

Then cut off most of the excess from the ends, fold sides in (as shown), and glue, then fold over onto back of mousepad and glue them flat.

I added another small strip down the middle due to the fact that the canvas was pretty thick and caused a bowing effect because of no extra bulk in the middle, you may not have to do that if your material is thinner.

After it was wrapped, I ran an iron over the top to smooth out any remaining wrinkles.

I just found a font I liked on Microsoft Word, printed out our monogram in a large enough font, cut it out and used it as a stencil.

Then dab your paint on.  This brush wasn't very dab worthy.  I definitely need a stencil brush.  But it worked well enough for the time being.

Then, for the outline, I just lined up two pieces of paper and stenciled in between them.  Like so...

The line came out a little uneven due to my non-dabbing brush, but I kinda like it a little uneven and wavy.

I think it works nicely in the office, and my mouse is much happier. And I'm happy that it was free:)

Painted Bud Vases

I found these precious little bud vases at Walmart for something like .96 or .98 cents.  I grabbed three.  I picked out 3 of my acrylic paints for the colors.  Dark Hydrangea, Heritage White, and Lipstick Red.  Wash and air dry the bottles first.  Mine were quite dusty.

Pour the paint in..I put a little too much, but it made coating the insides easier.  You can always pour the extra back in the paint bottle.

Then, I put a piece of wax paper on top, and you shake, shake, shake.  I had to hit it against my palm a couple of times to get it to go where I wanted it to.  The extra usually comes up to the top, and I just poured it out onto the wax paper, then scooped it back up into the paint bottle.

I swirled a paint brush around the mouth of the vases to smooth the paint, and then just let dry.  It seemed to take forever.  Probably because it was so thick inside.

And finished, wish a couple of silk buds since we don't have too many flowers around here this year.  The heat seemed to finish them off pretty quickly.  Even with regular watering.  I placed them around the house.  One in the office, one in the living room, one in the dining room.  The flowers are trimmed off of a strand of flower garland that I've had for a few years and never used.  Worked pretty well.

Floor Vase

I was so excited to find these gem at a little primitive store down here at the coast.  It was a little more than I wanted to pay, but it was perfect in every way, so it came to live at my house.  After it sat on my dining room table for about a week, I decided what I wanted to do with it.  So off to Michael's I went.  They almost always deliver good results when it comes to fake flowers.  And once again, they did.  I found these cherry blossom stems.  And they weren't pink!  An off white/brownish color that matched the picture in my head pefectly!  It's sitting by a basket with cross stitch supplies, magazine inspirations, and off course, my handy-dandy fur brush.  It's a necessity when you have an overly furry kangaroo, I mean, dog.